Tag Config

Configures the tags that will be shown in the object if they are alarmed.

To configure the tag, follow the steps below:

1.   Click the desired Alarm Object to select it.

2.   Insert the desired tag in the "New Tag" Field at the "Tags" tab.

3.   Click the "+" button.

4.   Repeat the steps 2 and 3 until all the tags are added.

5.   Select one of tag you just entered.

6.   Double-Click it or Click the "Alarm Tag Details" tab.

7.   Select/Deselect the desired alarms check-boxes.

To edit a configured tag, follow the steps below:

1.   Click the desired object to select it.

2.   Click the desired configured tag in the Tags tab.

3.   Select/Deselect the desired alarms check-boxes in the "Alarm Tag Details" tab.

To remove a configured tag, follow the steps below:

1.   Click the desired object to select it.

2.   Click the desired configured tag in the "Tags" tab.

3.   Click the "X" button.

Example: here we have three types of tag

You can check the box on the left side of the tag name to select all the alarms available for that type of tag.

You can also check the box on the header of each type of alarm to select it for all the tags that have this type of alarm available.